Any suggestions for someone tech savvy enough to run a proxmox server for a handful of services, to get started with home assistant?
Can you replicate something like a Google home with voice commands?
I may or may not be getting a new house soon.
I’m good with electrical to replace switches with wireless ones. But what do you get? Where do you start and where do you end?
What about the WAF?
I saw LTT did smart switches in his house and it was a mess of incompatibilities.
Any good resources?
I don’t even know what I don’t know haha
HAOS literally has a proxmox iso for home assistant. Slap that baby on.
There are homebrew voice units, but you’ll need a beefier system than normal to process in house. If you have apple devices you can expose certain elements from HA to apple home (and keep others obscured) to use your watch / voice etc.
There are a lot of home assistant communities and they are all very very friendly. It’s a massive learning curve and we’re all working together
Also shout out to community scripts! If you run proxmox and aren’t using community scripts then you’re about to hate yourself for all the manual builds you’ve done.
Look into ZWave and ZigBee mesh networks. I run Home Assistant with a couple hundred devices and integrations. ZWave tends to be my hardwired switches, and ZigBee tends to be my battery operated motion sensors, remotes, etc.
Personally, I run Home Assistant on its native HAOS on a raspberry Pi. In addition to Home Assistant, I have lots of automations running in Node Red, a no/low code orchestration addon.
For voice control, I’m playing with the Atom Echo.
Part hobby, part time and energy savings. One thing I love about Home Assistant is the integrations with so many devices and services. I have smart switches., remotes, smart plugs, energy monitors, RGB bulbs, thermometers, etc.
It’s a slippery slope of wanting to integrate absolutely everything! My doorbell, alarm system, thermostats, garage door, door locks, and so on.
Many are local “smart devices” using ZWave and ZigBee, and others are cloud integrations with other services.
I’ve gotten to a point where the Home Automation routines I rely on are so useful that I get annoyed if I ever have to do things “manually”.
Couple examples:
I have a remote by my bed that, when the goodnight button is pressed, turns off all the lights, sets the HVAC back to programmed mode, puts our computers to sleep, arms the alarm, locks the doors, and closes curtains.
I have a button by my garage door that sets an “auto arm” toggle that opens the garage door, unlocks the door to the garage and the waits for me to close the garage, at which point it arms the alarm, turns off the lights, locks my computers, turns off the HVAC, closes curtains, locks doors, etc.
I’ve been looking for some smart outlets, and it seems impossible to discover which ones can be used with normal well-known protocols and which can only be used through a phone app locked into a cloud service.
You will need an antenna /hub though. I use a sky connect antennae, it’s all locked into my house.
If you have to go wifi, tplink /tapo literally have a “local only” mode when you firewall them out. The only issue is they warn you you can’t operate them unless you’re connected to your home wifi. Which is rather the point.
None of the devices I bought for it talk to the internet! Home assistant can control and even update the Shellys completely over the local network.
As it should be
Remember Home assistant =/= smart home nonsense
I dont need some AI assistant to automatically manage my thermostat, I just want to be able to control it all using my own local server.
There are people who tie gemini into their HA instance
These people are insane.
Any suggestions for someone tech savvy enough to run a proxmox server for a handful of services, to get started with home assistant?
Can you replicate something like a Google home with voice commands?
I may or may not be getting a new house soon. I’m good with electrical to replace switches with wireless ones. But what do you get? Where do you start and where do you end? What about the WAF?
I saw LTT did smart switches in his house and it was a mess of incompatibilities.
Any good resources? I don’t even know what I don’t know haha
HAOS literally has a proxmox iso for home assistant. Slap that baby on.
There are homebrew voice units, but you’ll need a beefier system than normal to process in house. If you have apple devices you can expose certain elements from HA to apple home (and keep others obscured) to use your watch / voice etc.
There are a lot of home assistant communities and they are all very very friendly. It’s a massive learning curve and we’re all working together
Define beefy? Like 8 to 12gb vram? Or will an old 970 do the trick?
I really only skimmed over it before deciding IDGAF at this point (i’ll probably revisit later, but in the middle of renovations and kittens right now) but https://www.home-assistant.io/voice_control/voice_remote_local_assistant/ should set you right
Thanks!
Community scripts has home assistant, both lxc and VM options. Use the VM version and you can get HA up and running super quick.
https://community-scripts.org/
Also shout out to community scripts! If you run proxmox and aren’t using community scripts then you’re about to hate yourself for all the manual builds you’ve done.
Fuck. I almost wish I didn’t read this.
I have not been using community scripts, and I feel an amount of silly. Thanks!
Look into ZWave and ZigBee mesh networks. I run Home Assistant with a couple hundred devices and integrations. ZWave tends to be my hardwired switches, and ZigBee tends to be my battery operated motion sensors, remotes, etc.
Personally, I run Home Assistant on its native HAOS on a raspberry Pi. In addition to Home Assistant, I have lots of automations running in Node Red, a no/low code orchestration addon.
For voice control, I’m playing with the Atom Echo.
Couple hundred?! Are most of those lights or something? Forgive me I’m totally ignorant about home automation.
Is it a hobby to you or have you found significant time/energy savings? Or both?
Part hobby, part time and energy savings. One thing I love about Home Assistant is the integrations with so many devices and services. I have smart switches., remotes, smart plugs, energy monitors, RGB bulbs, thermometers, etc.
It’s a slippery slope of wanting to integrate absolutely everything! My doorbell, alarm system, thermostats, garage door, door locks, and so on.
Many are local “smart devices” using ZWave and ZigBee, and others are cloud integrations with other services.
I’ve gotten to a point where the Home Automation routines I rely on are so useful that I get annoyed if I ever have to do things “manually”.
Couple examples:
I have a remote by my bed that, when the goodnight button is pressed, turns off all the lights, sets the HVAC back to programmed mode, puts our computers to sleep, arms the alarm, locks the doors, and closes curtains.
I have a button by my garage door that sets an “auto arm” toggle that opens the garage door, unlocks the door to the garage and the waits for me to close the garage, at which point it arms the alarm, turns off the lights, locks my computers, turns off the HVAC, closes curtains, locks doors, etc.
That’s pretty dope and I see how it could actually really help my ADHD if I had an “everything off” button. Thanks for replying.
I’ve been looking for some smart outlets, and it seems impossible to discover which ones can be used with normal well-known protocols and which can only be used through a phone app locked into a cloud service.
Zigbee.
You will need an antenna /hub though. I use a sky connect antennae, it’s all locked into my house.
If you have to go wifi, tplink /tapo literally have a “local only” mode when you firewall them out. The only issue is they warn you you can’t operate them unless you’re connected to your home wifi. Which is rather the point.